On 12/28/2014 5:51 PM, Rick Mann wrote: > > Also, when it says "Using override eeprom data at slot 8," what does > that mean? I have a physical cape attached, a SparkFun prototype cape > with EEPROM, but the EEPROM is unflashed (I assume). If I can get > this manual overlay to work, I'll next try to flash the EEPROM with > the right stuff to get it all loaded at boot.
Slots 0-3 are reserved for capes auto-detected via their EEPROM values. If your EEPROM is unprogrammed, nothing will load for that slot, and you will need to manually load the overlay (as you are trying to do). Slot 4 is for the on-board eMMC, and slot 5 is for HDMI. If you disable the HDMI (with audio), slot 6 becomes the HDMIN cape (HDMI without audio). Any manually loaded capes will start at the next available slot number and increment from there. -- Charles Steinkuehler [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
