> On Dec 28, 2014, at 18:46 , Robert Nelson <[email protected]> wrote:
>
> So with dtb-rebuilder (wip: v3.19.x branch)
>
> You can define that pin as:
>
> BONE_P8_17 0x0f
> or:
> BONE_P8_17 0x3f
So, I set up dtb-rebuilder for 3.14, and it worked, in that I was able to get
my ADC and GPIO pins accessible, but I'm still not able to turn off the pullups
on my output pin. I decided to try to use your BONE_P8_17 macro in case I was
wrong about the address offset, but realized that's only in 3.19, and I have it
right, anyway:
0x02C (PIN_OUTPUT | MUX_MODE7) /* 0x02C gpio0_27 */
Also, there's the other issue I posted about having to do with rapidly reading
sysfs and hanging.
--
Rick Mann
[email protected]
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
