Problem with the A6A i believe will be old bootloader versus new bootloader. e.g. Angstrom + old bootloader on the eMMC, newer bootloader + Debian on the sdcard flasher image.
With that said, you should wait for Robert to chime in before taking drastic steps. Such as believing your board is bad. It is not impossible, but I think it is very unlikely. On Fri, Jan 9, 2015 at 8:19 PM, evilwulfie <[email protected]> wrote: > With a proper image it should flash. > > http://elinux.org/Beagleboard:Debian_On_BeagleBone_Black > > > http://elinux.org/Beagleboard:Ubuntu_On_BeagleBone_Black > > > On 1/9/2015 7:37 PM, Kevin Groce wrote: > > I am having such a hard time with flashing the BBB. I am guessing it is an > A6A revision based on the wiki. I am not a novice when it comes to flashing > but for some reason this bugger wont flash. I have followed the > instructions to a T and results are not forth coming. Do you think I could > have a bad board? When I I load the image to the card and press the user > boot button I do not get the LED response that is said to happen after > flash. I have used cheap 8gb SD card and a sandisk 16gb SD card and both > same outcome. Nothing. I need a board that works for a P-port cape project. > > > KG > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
