On Thursday, May 8, 2014 at 12:06:44 AM UTC+2, Samer Shatta wrote: > > Hello > i have beaglebone black Rev A5C that works correctly with the Serial debug > header > > yesterday i have bought a new beaglebone black Rev A6A (new BBB) , but > when i connect the serial FTDI debugger it didn't work at all > there is nothing displayed on the host terminal when the new BBB boot up > > i have tried to connect TX with RX from the debug header of the new BBB > and used minicom on the new BBB using with the following settings : > ttyO0 > 115200N1 > no hardware flow control > > > and try to write some chars , but nothing received , i think that the FTDI > debug header is not connected with the ttyO0 , i think that there is a > hardware bug from the BBB factory . > > if what i think is true so , i have to redirect the u-boot console output > to another tty like ttyO4 , but i don't know how to do that . >
I am having the same problem. Is it solved or the A6A is flawed for serial ftdi by default and requires further to do something? > > please help . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
