If you think you have an issue, request an RMA. Gerald
On Tue, Jan 13, 2015 at 5:27 PM, Shahbaz khan <[email protected]> wrote: > > > On Thursday, May 8, 2014 at 12:06:44 AM UTC+2, Samer Shatta wrote: >> >> Hello >> i have beaglebone black Rev A5C that works correctly with the Serial >> debug header >> >> yesterday i have bought a new beaglebone black Rev A6A (new BBB) , but >> when i connect the serial FTDI debugger it didn't work at all >> there is nothing displayed on the host terminal when the new BBB boot up >> >> i have tried to connect TX with RX from the debug header of the new BBB >> and used minicom on the new BBB using with the following settings : >> ttyO0 >> 115200N1 >> no hardware flow control >> >> >> and try to write some chars , but nothing received , i think that the >> FTDI debug header is not connected with the ttyO0 , i think that there is a >> hardware bug from the BBB factory . >> >> if what i think is true so , i have to redirect the u-boot console output >> to another tty like ttyO4 , but i don't know how to do that . >> > > I am having the same problem. Is it solved or the A6A is flawed for serial > ftdi by default and requires further to do something? > > >> >> please help . >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
