Robert, if it is likely related to 12.04 then let's try raring, which ros-hydro also supports. If you can help me with the rfs_ params for a raring image I can give that a shot.
On Wednesday, January 14, 2015 at 3:00:34 PM UTC-5, M Hickman wrote: > > Precise[ly] > > On Wednesday, January 14, 2015 at 2:56:18 PM UTC-5, RobertCNelson wrote: >> >> On Wed, Jan 14, 2015 at 1:51 PM, Robert Nelson <[email protected]> >> wrote: >> > >> > >> > On Wed, Jan 14, 2015 at 1:33 PM, M Hickman <[email protected]> >> wrote: >> >> >> >> Thank you, Robert. I appreciate you adding a ros-hydro config! >> >> >> >> I followed your instructions (under 14.04 on the Black). I dd'd the >> image >> >> to the SD card booted it. The flasher started and then halted with a >> kernel >> >> panic. I tried re-writing the image to the SD card using my Mac, with >> the >> >> same result. >> >> >> >> I looked through the forums for clues. I copied >> >> BBB-eMMC-flasher-ubuntu-14.04.1-console-armhf-2015-01-06-2gb.img to >> the SD >> >> card, booted it and it flashed the eMMC just fine, so it's not a >> faulty SD >> >> card. I am powering the board with a 5V supply that came with the >> board and >> >> have nothing else attached. Not sure where to go from here. >> >> >> >> My FTDI cable is at the office, so I've attached a photo of the HDMI >> >> output. The final lines before the kernel panic are: >> > >> > >> > No worries about the ftdi, everything is mirrored to the hdmi now. ;) >> > >> > >> >> >> >> >> >> ---------------- >> >> Formatting: /dev/mmcblk1 >> >> [ ] mmcblk1: unknown partition table >> >> [ ] mmcblk1: p1 >> >> mkfs.ext4 /dev/mmcblk1p1 -L BOOT >> >> [ ] Kernel panic - not syncing: Attempted to kill init! >> >> exitcode=0x00000100 >> >> >> >> Suggestions? >> > >> > >> > What's odd, it's failing so early. Does it always stop at the same >> place. >> > (you don't have to re0image the microSD card).. >> > >> > For clarification (and i'll test here) what was the file name of the >> flasher >> > that is failing? >> >> ah this is after you did: >> >> ./RootStock-NG.sh -c ros_hydro >> >> Fires up my imx6q... probably something in 12.04 that's breaking things.. >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
