> > > Those directions are just old and out-dated.. > > https://eewiki.net/display/linuxonarm/BeagleBoard > > > Hi Robert,
Thanks for the link. I am using the same instructions as in wiki, with PSP 04.02.00.07: make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm distclean make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm omap3_beagle_config make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm (by the way, in the wiki it says omap3_beagle_defconfig while it should be omap3_beagle_config ) But The u-boot does not start on the beagleboard, using some binary I've found (revC4 image from http://elinux.org/Beagleboard:BeagleBoard#BeagleBoard_Rev_C4_Image) Is there any idea why I have no success in bring-up of this simple board ? Regards, Ran -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
