Understood. I can't really answer what the issue might be. Other than maybe the card was not created correctly. Try re-flashing the SD card again.
Gerald On Wed, Feb 11, 2015 at 8:34 PM, <[email protected]> wrote: > beagleboard-xm is booting with they provided sd card, but we are using > same booting files with swissbit sd card. beagleboard didn't show any > serialport messages. inserial port it gives 00. i used swissbit MLC,class > 6, 4GB SD card. > > On Wednesday, February 11, 2015 at 6:28:25 PM UTC+5:30, Gerald wrote: >> >> What size card are you trying to use? >> >> Gerald >> >> >> On Wed, Feb 11, 2015 at 6:55 AM, Gerald Coley <[email protected]> >> wrote: >> >>> Most likely it cannot work at the lower voltage which means it is out of >>> spec. Voltage is 3.0V on the xM. >>> >>> Gerald >>> >>> >>> On Tue, Feb 10, 2015 at 11:16 PM, <[email protected]> wrote: >>> >>>> hi all, >>>> we are working with beagleboard-xm. we did custom code for sd card >>>> booting it is working fine with kingstone sd card and also beagleboard-xm >>>> provided sd card also. But now we are going to use standard sd card such as >>>> swissbit. When we use swissbit Sd card beagleboard-xm is not booting. i >>>> don't know what is the difference between those two. please help me* >>>> why swissbit sd card is not working in beagleboard-xm??* >>>> thanks in advance. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> Gerald >>> >>> [email protected] >>> http://beagleboard.org/ >>> http://circuitco.com/support/ >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> http://circuitco.com/support/ >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
