is there any response or any cluess about this swisbit sd card???/?????? On Friday, February 13, 2015 at 3:03:57 PM UTC+5:30, [email protected] wrote: > > i tried with formatter 4 to format the swissbit sd card if i used option > format type is Full(erase), it gives text like flash erase operation is > canceled because this device didn't support it. what is problem? > > On Thursday, February 12, 2015 at 9:46:43 PM UTC+5:30, Gerald wrote: >> >> Understood. I can't really answer what the issue might be. Other than >> maybe the card was not created correctly. Try re-flashing the SD card again. >> >> Gerald >> >> >> On Wed, Feb 11, 2015 at 8:34 PM, <[email protected]> wrote: >> >>> beagleboard-xm is booting with they provided sd card, but we are using >>> same booting files with swissbit sd card. beagleboard didn't show any >>> serialport messages. inserial port it gives 00. i used swissbit MLC,class >>> 6, 4GB SD card. >>> >>> On Wednesday, February 11, 2015 at 6:28:25 PM UTC+5:30, Gerald wrote: >>>> >>>> What size card are you trying to use? >>>> >>>> Gerald >>>> >>>> >>>> On Wed, Feb 11, 2015 at 6:55 AM, Gerald Coley <[email protected]> >>>> wrote: >>>> >>>>> Most likely it cannot work at the lower voltage which means it is out >>>>> of spec. Voltage is 3.0V on the xM. >>>>> >>>>> Gerald >>>>> >>>>> >>>>> On Tue, Feb 10, 2015 at 11:16 PM, <[email protected]> wrote: >>>>> >>>>>> hi all, >>>>>> we are working with beagleboard-xm. we did custom code for sd card >>>>>> booting it is working fine with kingstone sd card and also >>>>>> beagleboard-xm >>>>>> provided sd card also. But now we are going to use standard sd card such >>>>>> as >>>>>> swissbit. When we use swissbit Sd card beagleboard-xm is not booting. i >>>>>> don't know what is the difference between those two. please help me* >>>>>> why swissbit sd card is not working in beagleboard-xm??* >>>>>> thanks in advance. >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Gerald >>>>> >>>>> [email protected] >>>>> http://beagleboard.org/ >>>>> http://circuitco.com/support/ >>>>> >>>> >>>> >>>> >>>> -- >>>> Gerald >>>> >>>> [email protected] >>>> http://beagleboard.org/ >>>> http://circuitco.com/support/ >>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> http://circuitco.com/support/ >> >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
