On Mar 1, 2015 11:12 AM, <[email protected]> wrote: > > Hi guys, > > It seems that I have a boot problem for my xm rev c. I am currently using the netinstall method with several sd cards: > 1. Kingston SDHC class 4, 4GB > 2. Kingston SDHC class 10, I 1, 16 GB > > On reboot, it does not pass the U-Boot SPL stage and I have to redo the mmc card.
So, what did you change at the partition stage of the install? > > I noticed that using the netinstall method,both beagle and beagle xm boards have the same procedure. > > Best, > Ovidiu > > Here is the boot sequence log: > > > > U-Boot SPL 2015.01-00011-g2efed9f (Jan 12 2015 - 17:15:10) > SPL: Please implement spl_start_uboot() for your board > SPL: Direct Linux boot not active! > reading u-boot.img > reading u-boot.img > > > U-Boot 2015.01-00011-g2efed9f (Jan 12 2015 - 17:15:10), Build: jenkins-github_Bootloader-Builder-90 > > OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > Beagle xM Rev C > No EEPROM on expansion board > No EEPROM on expansion board > Die ID #2a5c00029ff80000016830c31801c025 > Net: usb_ether > Error: usb_ether address not set. > > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > SD/MMC found on device 0 > Checking for: /uEnv.txt ... > Checking for: /boot/uEnv.txt ... > reading /boot/uEnv.txt > 246 bytes read in 5 ms (47.9 KiB/s) > Loaded environment from /boot/uEnv.txt > Checking if uname_r is set in /boot/uEnv.txt... > Running uname_boot ... > loading /boot/vmlinuz-current ... > reading /boot/vmlinuz-current > 5194104 bytes read in 321 ms (15.4 MiB/s) > loading /boot/dtbs/current/omap3-beagle-xm.dtb ... > reading /boot/dtbs/current/omap3-beagle-xm.dtb > 63096 bytes read in 21 ms (2.9 MiB/s) > loading /boot/initrd.img-current ... > reading /boot/initrd.img-current > 26517049 bytes read in 1614 ms (15.7 MiB/s) > > Installer for [utopic-armhf] is using the Video Interface > Use [--serial-mode] to force Installing over the Serial Interface > > debug: [console=tty0 root=/dev/ram0 rw] ... > debug: [bootz 0x82000000 0x88080000:1949e39 0x88000000] ... > Kernel image @ 0x82000000 [ 0x000000 - 0x4f4178 ] > ## Flattened Device Tree blob at 88000000 > Booting using the fdt blob at 0x88000000 > Loading Ramdisk to 8e6b6000, end 8ffffe39 ... OK > Using Device Tree in place at 88000000, end 88012677 > > Starting kernel ... > > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
