Yes, assuming your cabling is good enough, they are supposed to support up to a 4 MHz signal per pin.
Nathaniel R. Lewis (925) 309 9730 [email protected] https://nathanielrlewis.com/ On Thu, Mar 12, 2015 at 1:24 PM, <[email protected]> wrote: > Hello, > > I recently find about about eQEP, and I was curious to know its maximum > input frquency for pulses. > > I have Pololu's 50:1 Geared Motor with Encoder (64 CPR) > https://www.pololu.com/product/1444 > > On one revolution of the geared shaft, it will give 64x50 = 3200 ticks. > At 200 RPM, it will give 3200x200 = 640k ticks per minute, that makes > 10.6k ticks per second. > > Will the Beaglebone's eQEP support this much speed? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
