<https://lh3.googleusercontent.com/-9V8XjvGi9hc/VRwRInfI-bI/AAAAAAAAAGI/a8U2BzGT9wI/s1600/Screenshot%2Bfrom%2B2015-04-01%2B21%3A00%3A43.png>
<https://lh3.googleusercontent.com/-9V8XjvGi9hc/VRwRInfI-bI/AAAAAAAAAGI/a8U2BzGT9wI/s1600/Screenshot%2Bfrom%2B2015-04-01%2B21%3A00%3A43.png> As you told,I tried to flash the latest debian image.But still i got some error.I am attaching the snapshot of the error with this mail.I am using A6 version of Beagle Bone Black. Please find the attached mail. On Wednesday, 1 April 2015 00:27:53 UTC+5:30, Graham wrote: > > This means that the BBB is trying to boot from the serial port. > > This usually means that the BBB can not see a valid image in the eMMC or > on the uSD card, if present. > It is searching desperately for something to boot from. So load a new > image, like Gerald says. > > Less likely, it might also mean that you hung some some I/O loads on the > pins that control boot > configuration and order, and you are overriding the on-board boot > instructions. Disconnect all your external > I/O from the LCD pins and try again. If this works, go read the System > Reference Manual. > > --- Graham > > == > > On Tuesday, March 31, 2015 at 1:06:14 PM UTC-5, [email protected] wrote: >> >> My beagle bone black was working fine and after some time its now giving >> only character C on uart port.I tried to flash a new image still it gives >> the same C character.Can anyone tell me what should i do to bring it back? >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
