Make sure there is nothing plugged into the expansion headers. If you can't flash it, request an RMA and we will flash it for you.
Gerald On Wed, Apr 1, 2015 at 10:39 AM, <[email protected]> wrote: > > <https://lh3.googleusercontent.com/-9V8XjvGi9hc/VRwRInfI-bI/AAAAAAAAAGI/a8U2BzGT9wI/s1600/Screenshot%2Bfrom%2B2015-04-01%2B21%3A00%3A43.png> > > > <https://lh3.googleusercontent.com/-9V8XjvGi9hc/VRwRInfI-bI/AAAAAAAAAGI/a8U2BzGT9wI/s1600/Screenshot%2Bfrom%2B2015-04-01%2B21%3A00%3A43.png> > As you told,I tried to flash the latest debian image.But still i got some > error.I am attaching the snapshot of the error with this mail.I am using A6 > version of Beagle Bone Black. > Please find the attached mail. > > > On Wednesday, 1 April 2015 00:27:53 UTC+5:30, Graham wrote: >> >> This means that the BBB is trying to boot from the serial port. >> >> This usually means that the BBB can not see a valid image in the eMMC or >> on the uSD card, if present. >> It is searching desperately for something to boot from. So load a new >> image, like Gerald says. >> >> Less likely, it might also mean that you hung some some I/O loads on the >> pins that control boot >> configuration and order, and you are overriding the on-board boot >> instructions. Disconnect all your external >> I/O from the LCD pins and try again. If this works, go read the System >> Reference Manual. >> >> --- Graham >> >> == >> >> On Tuesday, March 31, 2015 at 1:06:14 PM UTC-5, [email protected] wrote: >>> >>> My beagle bone black was working fine and after some time its now giving >>> only character C on uart port.I tried to flash a new image still it gives >>> the same C character.Can anyone tell me what should i do to bring it back? >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
