So i downloaded the newest image put it on an SD card and it works great.
now i set up a static ip address in /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.254.205
netmask 255.255.255.0
gateway 192.168.254.254
now the interesting thing
as expected i get a static ip address on a normal boot
and i get a static ip address after a shutdown now -r
but if i get a power failure and the board reboots
i get a DHCP address.
if i then issue a shutdown now -r
and reboot i get my static ip address
is there any reason this would take place ?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
