ip -s link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
RX: bytes packets errors dropped overrun mcast
610918 6403 0 0 0 0
TX: bytes packets errors dropped carrier collsns
610918 6403 0 0 0 0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
link/ether 12:34:56:78:90:12 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
1313119911 1246744 0 0 0 0
TX: bytes packets errors dropped carrier collsns
95697537 731304 0 0 0 0
On Sun, Apr 19, 2015 at 7:15 AM, prashuk jain <[email protected]>
wrote:
> How the packets are processed in beaglebone 3.8 kernel from MAC layer to
> Application layer. ??
>
> If I want to count the number of packets count at MAC layer....What all
> Kernel files are required.??
>
> Thanks in advance :))
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
