Thanks Sir, this is using qdisc utility to count the number of packets. I want to run a counter at MAC layer only, for which I have to write a Kernel Module.
I watched eth.c file in linux 3.14 kernel, but got confused. Any documentation or help would be appreciable ?? Thanks :) On Monday, 20 April 2015 02:40:46 UTC+5:30, Przemek Klosowski wrote: > > ip -s link > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode > DEFAULT group default > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > RX: bytes packets errors dropped overrun mcast > 610918 6403 0 0 0 0 > TX: bytes packets errors dropped carrier collsns > 610918 6403 0 0 0 0 > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UP mode DEFAULT group default qlen 1000 > link/ether 12:34:56:78:90:12 brd ff:ff:ff:ff:ff:ff > RX: bytes packets errors dropped overrun mcast > 1313119911 1246744 0 0 0 0 > TX: bytes packets errors dropped carrier collsns > 95697537 731304 0 0 0 0 > > > On Sun, Apr 19, 2015 at 7:15 AM, prashuk jain <[email protected] > <javascript:>> wrote: > >> How the packets are processed in beaglebone 3.8 kernel from MAC layer to >> Application layer. ?? >> >> If I want to count the number of packets count at MAC layer....What all >> Kernel files are required.?? >> >> Thanks in advance :)) >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
