Thanks Robert. I went ahead and . . . william@eee-pc:~/downloads/linux-images$ *sudo dd if=/home/william/downloads/linux-images/bone-debian-7.8-console-armhf-2015-03-01-2gb.img of=/dev/sdb1*
I figure I'll do a write up, and maybe put up a blogpost to help make things easier for others who may wish to travel down the same path. If not . . .well then I'll have an online template at least I can follow. At one point I was pretty good with all the device tree stuff. Now . . . all the "rust" is starting to show. On Fri, May 8, 2015 at 2:15 PM, Robert Nelson <[email protected]> wrote: > On Fri, May 8, 2015 at 3:46 PM, William Hermans <[email protected]> wrote: > > OK *other* work done for the time being, I have some time to tinker my > > progress so far . . . > > > > IM working with a custom barefs rootfs so . . . from what I can glean so > far > > i need ... > > > > debian@beaglebone:~$ sudo apt-get install bb-customizations > > ... > > Setting up bb-customizations (1.20150507-1~bpo70+20150507+1) ... > > > > > > debian@beaglebone:~$ git clone > > https://github.com/RobertCNelson/bb.org-overlays > > Cloning into 'bb.org-overlays'... > > remote: Counting objects: 141, done. > > remote: Compressing objects: 100% (114/114), done. > > remote: Total 141 (delta 66), reused 90 (delta 15), pack-reused 0 > > Receiving objects: 100% (141/141), 34.84 KiB, done. > > Resolving deltas: 100% (66/66), done. > > > > debian@beaglebone:~$ cd ./bb.org-overlays/ > > debian@beaglebone:~/bb.org-overlays$ sudo ./make.sh > > sudo: ./make.sh: command not found > > Sorry, i cleaned up the makefile this morning: > > "./install.sh" will do everything > > > > > At this point I did a bit of investigation. First I already figured dtc > was > > not installed. Second . . . /opt/scripts/ is fairly bare. Only two > scripts > > under the tools sub directory. Related to eMMC, and partition growing. > > "./dtc-overlay.sh" is now in "bb.org-overlays" too... > > > I realize from where I am it is probably possible to fix all of this. > > However it is probably not worth the hassle - As my "testing" sdcard > image > > is very tainted by now, and I have "notes" to get me back to a working > > pristine image. So, last night I downloaded two testing images. Both > > console, but one is Jessie, and the other is Wheezy as far as I can > tell. I > > mounted one images and noticed that the /opt/scripts/ directory seems to > be > > fully populated. Other than that I did not further investigation. > > > > Is there a preferred image to start off with as a base ? > > any is fine, all the tools are in the git repo now.. > > > > > I also noticed in the sources for the git you posted a link to there is a > > dtbo file for CAN1. Thanks for that Robert. I figured I was going to > have to > > hunt down and compile from my *bone47 dev base . . . which may have > turned > > into a nightmare for me . . . > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
