But the network interface seems to be working fine.
What nameserver is listed in /etc/resolv.conf under "nameserver" ? If it is
different from your network, then you should probably change it to be
accurate.
Then try to ping local IPs again . . .
On Tue, May 19, 2015 at 1:56 PM, Robert Nelson <robertcnel...@gmail.com>
wrote:
> On Tue, May 19, 2015 at 3:48 PM, Fernando Derkoski <bril...@gmail.com>
> wrote:
> > Hi, first thank you for the response, here is the output where the
> network
> > did not work:
> >
> > root@beaglebone:~# dmesg | grep mdio
> > [ 1.040419] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
> > [ 1.040439] davinci_mdio 4a101000.mdio: detected phy mask fffffffb
> > [ 1.047217] libphy: 4a101000.mdio: probed
> > [ 1.047246] davinci_mdio 4a101000.mdio: phy[2]: device
> 4a101000.mdio:02,
> > driver SMSC LAN8710/LAN8720
>
> Humm, that is odd, it corrected for [phy mask fffffffb] with
> [4a101000.mdio:02]
>
> But it should have been phy[4]... [4a101000.mdio:04]
>
> The math conversion in the phy search patch is:
>
> phy_mask = fffffffb
>
> for (i = 0; i < PHY_MAX_ADDR; i++) {
> if ((phy_mask & (1 << i)) == 0) {
> addr = (u32) i;
> break;
> }
> }
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
