give us the specs of the PS
On 6/3/2015 7:06 PM, [email protected] wrote: > Just got my brand new kit and got it up, updated to the latest Debian > 7.8 everything seemed to run fine, the Ethernet connection works good. > Now came the time to see if I could boot the board on my new 5V power > supply. That didn't go well. The leds came on, then off then on then > off every 30 seconds or so. > > I hooked up my serial cable, started a tty terminal to see if anything > was coming up and behold, the board seemed to be stuck in a boot loop. > I observed it go through the boot sequence, bring up the OS and then > when the login prompt comes up, the board reboots all over again. > Tried different power supplies, all with the same result. I went to > the IRC channel to get some help and was told I should try the new > debian 8.0 release. I did so with the same results. > > I cannot get this board to come up any other way than to connect the > micro usb cable to my pc. The power supply connection does not seem > to work and I don't understand what the difference between the two > might be. > > There is something very flaky going on somewhere and I am out of ideas > except to return the board for a new one. > > Has anyone encountered this issue before? Any opinions? > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
