and another one: ls -al /sys/bus/i2c/devices/i2c-0/0-0050/ total 0 drwxr-xr-x 4 root root 0 Jun 29 12:22 . drwxr-xr-x 8 root root 0 Jun 29 12:13 .. lrwxrwxrwx 1 root root 0 Jun 29 12:13 driver -> ../../../../../../bus/i2c/drivers/at24 -r--r--r-- 1 root root 4096 Jun 29 12:22 modalias -r--r--r-- 1 root root 4096 Jun 29 12:22 name drwxr-xr-x 3 root root 0 Jun 29 12:13 nvmem lrwxrwxrwx 1 root root 0 Jun 29 12:22 of_node -> ../../../../../../firmware/devicetree/base/ocp/i2c@44e0b000 /baseboard_eeprom@50 drwxr-xr-x 2 root root 0 Jun 29 12:22 power lrwxrwxrwx 1 root root 0 Jun 29 12:13 subsystem -> ../../../../../../bus/i2c -rw-r--r-- 1 root root 4096 Jun 29 12:13 uevent
but root@beaglebone:~# ./beaglebone-black-g-ether-load.sh hexdump: /sys/bus/i2c/devices/0-0050/eeprom: No such file or directory hexdump: /sys/bus/i2c/devices/0-0050/eeprom: No such file or directory hexdump: /sys/bus/i2c/devices/0-0050/eeprom: No such file or directory cpsw.0: 78:A5:04:BC:D2:DD cpsw.1: 78:A5:04:BC:D2:DF 2015-06-29 13:20 GMT+01:00 Artur Festyn <[email protected]>: > :) Ok, understand, this is not a problem, thank you > what about > 3.177810] omap_voltage_late_init: Voltage driver support not added > > > 2015-06-29 13:11 GMT+01:00 Robert Nelson <[email protected]>: > >> On Mon, Jun 29, 2015 at 5:24 AM, Jan Kinkazu <[email protected]> >> wrote: >> > Have this problem in 4.1-bone9 >> > >> > net eth0: initializing cpsw version 1.12 (0) >> > [ 9.014985] net eth0: phy found : id is : 0x7c0f1 >> > [ 9.015081] libphy: PHY 4a101000.mdio:01 not found >> > [ 9.020112] net eth0: phy 4a101000.mdio:01 not found on slave 1 >> > >> > kernel was generated by up to date build_deb.sh >> > What should i do to get rid of it? >> >> What's your actual problem? >> >> mdio:00 = eth0... >> >> mdio:01 = NOT Connected.. >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/9mctrG26Mc8/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
