Had to re-install the kernel and now it is recognized as it should be. Many thanks! Now on to the next challenge... fixing the windowing system yet again.
On Mon, Jul 6, 2015 at 1:21 PM Robert Nelson <[email protected]> wrote: > On Mon, Jul 6, 2015 at 11:31 AM, Robert Nelson <[email protected]> > wrote: > > On Mon, Jul 6, 2015 at 11:16 AM, Robert Nelson <[email protected]> > wrote: > >> On Mon, Jul 6, 2015 at 10:36 AM, Robert Nelson <[email protected]> > wrote: > >>> On Mon, Jul 6, 2015 at 9:14 AM, Philip Polstra <[email protected]> > wrote: > >>>> ubuntu@arm:~$ dtc --version > >>>> Version: DTC 1.4.1-g2a37d2d8 > >>>> ubuntu@arm:~$ uname -r > >>>> 4.1.0-rc8-bone9 > >>>> ubuntu@arm:~$ dmesg|grep bone > >>>> [ 0.000000] Linux version 4.1.0-rc8-bone9 > (root@a4-imx6q-wandboard-2gb) > >>>> (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #1 Wed Jun 17 > 02:36:41 > >>>> UTC 2015 > >>>> [ 3.111917] usb usb1: Manufacturer: Linux 4.1.0-rc8-bone9 musb-hcd > >>>> [ 3.270249] bone_capemgr bone_capemgr: Baseboard: > >>>> 'A335BNLT,00C0,3214BBBK6007' > >>>> [ 3.270270] bone_capemgr bone_capemgr: > >>>> compatible-baseboard=ti,beaglebone-black - #slots=4 > >>>> [ 3.322347] bone_capemgr bone_capemgr: slot #0: No cape found > >>>> [ 3.382332] bone_capemgr bone_capemgr: slot #1: No cape found > >>>> [ 3.442331] bone_capemgr bone_capemgr: slot #2: No cape found > >>>> [ 3.472330] bone_capemgr bone_capemgr: slot #3: '4D 4.3 LCD CAPE- > >>>> 4DCAPE-43T ,00A1,4D SYSTEMS ,BB-BONE-LCD4-01' > >>>> [ 3.472514] bone_capemgr bone_capemgr: initialized OK. > >>>> [ 4.482478] bone_capemgr bone_capemgr: loader: failed to load > slot-3 > >>>> BB-BONE-LCD4-01:00A1 (prio 0) > >>>> ubuntu@arm:~$ > >>> > >>> Thanks Philip, > >>> > >>> Pretty much replicated on ubuntu trusty... > >>> > >>> I'm going to quickly verify debian jessie isn't broken. But ubuntu > >>> might be doing something funny with the location of *.dtbo, i've been > >>> shoving them under /lib/firmware (and copying them to the > >>> initrd.img).. > >> > >> Fun... regressions across the board.. looks like a dtc version issue.. > > > > Okay, back to testing trusty... on debian since i don't have the cape > > plugged, i have to override, and i forgot the ":00A1" part.. > > Nope, works perfect: > > ubuntu@arm:~$ dmesg | grep bone > [ 0.000000] Linux version 4.1.1-bone9 (root@a5-imx6q-wandboard-2gb) > (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04) ) #1 Tue Jun > 30 17:32:28 UTC 2015 > [ 0.000000] Kernel command line: console=tty0 > console=ttyO0,115200n8 bone_capemgr.enable_partno=BB-BONE-LCD4-01:00A1 > root=/dev/mmcblk0p1 rootfstype=ext4 rootwait fixrtc coherent_pool=1M > quiet > [ 3.036329] usb usb1: Manufacturer: Linux 4.1.1-bone9 musb-hcd > [ 3.166983] bone_capemgr bone_capemgr: Baseboard: > 'A335BNLT,000C,2115BBBK0347' > [ 3.167006] bone_capemgr bone_capemgr: > compatible-baseboard=ti,beaglebone-black - #slots=4 > [ 3.222207] bone_capemgr bone_capemgr: slot #0: No cape found > [ 3.282234] bone_capemgr bone_capemgr: slot #1: No cape found > [ 3.342193] bone_capemgr bone_capemgr: slot #2: No cape found > [ 3.402194] bone_capemgr bone_capemgr: slot #3: No cape found > [ 3.408242] bone_capemgr bone_capemgr: enabled_partno PARTNO > 'BB-BONE-LCD4-01' VER '00A1' PR '0' > [ 3.408252] bone_capemgr bone_capemgr: slot #4: override > [ 3.408264] bone_capemgr bone_capemgr: Using override eeprom data at > slot 4 > [ 3.408278] bone_capemgr bone_capemgr: slot #4: 'Override Board > Name,00A1,Override Manuf,BB-BONE-LCD4-01' > [ 3.408506] bone_capemgr bone_capemgr: initialized OK. > [ 4.436414] bone_capemgr bone_capemgr: slot #4: dtbo > 'BB-BONE-LCD4-01-00A1.dtbo' loaded; overlay id #0 > ubuntu@arm:~$ cat /boot/uEnv.txt | grep dtb > dtb=am335x-boneblack-overlay.dtb > > I'm going to guess, you didn't set dtb= > > Like shown under "BBB compatibility issues:" > > Use blank overlay (HDMI & eMMC disabled) (/boot/uEnv.txt): > dtb=am335x-boneblack-overlay.dtb > > BB-BONE-LCD4-01-00A1.dts > Disable: HDMI > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
