> > Now on to the next challenge... fixing the windowing system yet again. >
Lubuntu ! That's my cure anyhow . . . On Mon, Jul 6, 2015 at 12:06 PM, Philip Polstra <[email protected]> wrote: > Had to re-install the kernel and now it is recognized as it should be. > Many thanks! Now on to the next challenge... fixing the windowing system > yet again. > > On Mon, Jul 6, 2015 at 1:21 PM Robert Nelson <[email protected]> > wrote: > >> On Mon, Jul 6, 2015 at 11:31 AM, Robert Nelson <[email protected]> >> wrote: >> > On Mon, Jul 6, 2015 at 11:16 AM, Robert Nelson <[email protected]> >> wrote: >> >> On Mon, Jul 6, 2015 at 10:36 AM, Robert Nelson < >> [email protected]> wrote: >> >>> On Mon, Jul 6, 2015 at 9:14 AM, Philip Polstra <[email protected]> >> wrote: >> >>>> ubuntu@arm:~$ dtc --version >> >>>> Version: DTC 1.4.1-g2a37d2d8 >> >>>> ubuntu@arm:~$ uname -r >> >>>> 4.1.0-rc8-bone9 >> >>>> ubuntu@arm:~$ dmesg|grep bone >> >>>> [ 0.000000] Linux version 4.1.0-rc8-bone9 >> (root@a4-imx6q-wandboard-2gb) >> >>>> (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #1 Wed Jun 17 >> 02:36:41 >> >>>> UTC 2015 >> >>>> [ 3.111917] usb usb1: Manufacturer: Linux 4.1.0-rc8-bone9 musb-hcd >> >>>> [ 3.270249] bone_capemgr bone_capemgr: Baseboard: >> >>>> 'A335BNLT,00C0,3214BBBK6007' >> >>>> [ 3.270270] bone_capemgr bone_capemgr: >> >>>> compatible-baseboard=ti,beaglebone-black - #slots=4 >> >>>> [ 3.322347] bone_capemgr bone_capemgr: slot #0: No cape found >> >>>> [ 3.382332] bone_capemgr bone_capemgr: slot #1: No cape found >> >>>> [ 3.442331] bone_capemgr bone_capemgr: slot #2: No cape found >> >>>> [ 3.472330] bone_capemgr bone_capemgr: slot #3: '4D 4.3 LCD CAPE- >> >>>> 4DCAPE-43T ,00A1,4D SYSTEMS ,BB-BONE-LCD4-01' >> >>>> [ 3.472514] bone_capemgr bone_capemgr: initialized OK. >> >>>> [ 4.482478] bone_capemgr bone_capemgr: loader: failed to load >> slot-3 >> >>>> BB-BONE-LCD4-01:00A1 (prio 0) >> >>>> ubuntu@arm:~$ >> >>> >> >>> Thanks Philip, >> >>> >> >>> Pretty much replicated on ubuntu trusty... >> >>> >> >>> I'm going to quickly verify debian jessie isn't broken. But ubuntu >> >>> might be doing something funny with the location of *.dtbo, i've been >> >>> shoving them under /lib/firmware (and copying them to the >> >>> initrd.img).. >> >> >> >> Fun... regressions across the board.. looks like a dtc version issue.. >> > >> > Okay, back to testing trusty... on debian since i don't have the cape >> > plugged, i have to override, and i forgot the ":00A1" part.. >> >> Nope, works perfect: >> >> ubuntu@arm:~$ dmesg | grep bone >> [ 0.000000] Linux version 4.1.1-bone9 (root@a5-imx6q-wandboard-2gb) >> (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04) ) #1 Tue Jun >> 30 17:32:28 UTC 2015 >> [ 0.000000] Kernel command line: console=tty0 >> console=ttyO0,115200n8 bone_capemgr.enable_partno=BB-BONE-LCD4-01:00A1 >> root=/dev/mmcblk0p1 rootfstype=ext4 rootwait fixrtc coherent_pool=1M >> quiet >> [ 3.036329] usb usb1: Manufacturer: Linux 4.1.1-bone9 musb-hcd >> [ 3.166983] bone_capemgr bone_capemgr: Baseboard: >> 'A335BNLT,000C,2115BBBK0347' >> [ 3.167006] bone_capemgr bone_capemgr: >> compatible-baseboard=ti,beaglebone-black - #slots=4 >> [ 3.222207] bone_capemgr bone_capemgr: slot #0: No cape found >> [ 3.282234] bone_capemgr bone_capemgr: slot #1: No cape found >> [ 3.342193] bone_capemgr bone_capemgr: slot #2: No cape found >> [ 3.402194] bone_capemgr bone_capemgr: slot #3: No cape found >> [ 3.408242] bone_capemgr bone_capemgr: enabled_partno PARTNO >> 'BB-BONE-LCD4-01' VER '00A1' PR '0' >> [ 3.408252] bone_capemgr bone_capemgr: slot #4: override >> [ 3.408264] bone_capemgr bone_capemgr: Using override eeprom data at >> slot 4 >> [ 3.408278] bone_capemgr bone_capemgr: slot #4: 'Override Board >> Name,00A1,Override Manuf,BB-BONE-LCD4-01' >> [ 3.408506] bone_capemgr bone_capemgr: initialized OK. >> [ 4.436414] bone_capemgr bone_capemgr: slot #4: dtbo >> 'BB-BONE-LCD4-01-00A1.dtbo' loaded; overlay id #0 >> ubuntu@arm:~$ cat /boot/uEnv.txt | grep dtb >> dtb=am335x-boneblack-overlay.dtb >> >> I'm going to guess, you didn't set dtb= >> >> Like shown under "BBB compatibility issues:" >> >> Use blank overlay (HDMI & eMMC disabled) (/boot/uEnv.txt): >> dtb=am335x-boneblack-overlay.dtb >> >> BB-BONE-LCD4-01-00A1.dts >> Disable: HDMI >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
