On Thu, Jul 30, 2015 at 5:56 PM, <[email protected]> wrote: > I have tried flashing the eMMC on my BBB with both the latest Debian image > as well as the latest Angstrom image found under the getting started tab of > the beaglebone website. > > I put the image into the micro SD card slot in the BBB and held the boot > button until the four status lights all turned on for a few seconds. After > this, the heartbeat pattern is running on the board and the D4 LED is dimly > lit. I have watched some videos that show this happening after the boot > button has been pressed down, however no matter how long I wait for the > LED's never go solid to notify me the flashing is done. I also bought the > board from Element14. > > I left the board powered on for a night and awoke to it still doing the same > heartbeat pattern with D4 dimly lit, so I tried powering it off and seeing > what I could find when connecting to it via USB. It did not create the web > server or anything so I am fairly sure it didn't update teh eMMC. > > Any suggestions would be appreciated.
What was the name of the file? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
