more important is that you power it from a 2 amp power supply and not the USB
On 7/30/2015 5:55 PM, Robert Nelson wrote: > On Thu, Jul 30, 2015 at 5:56 PM, <[email protected]> wrote: >> I have tried flashing the eMMC on my BBB with both the latest Debian image >> as well as the latest Angstrom image found under the getting started tab of >> the beaglebone website. >> >> I put the image into the micro SD card slot in the BBB and held the boot >> button until the four status lights all turned on for a few seconds. After >> this, the heartbeat pattern is running on the board and the D4 LED is dimly >> lit. I have watched some videos that show this happening after the boot >> button has been pressed down, however no matter how long I wait for the >> LED's never go solid to notify me the flashing is done. I also bought the >> board from Element14. >> >> I left the board powered on for a night and awoke to it still doing the same >> heartbeat pattern with D4 dimly lit, so I tried powering it off and seeing >> what I could find when connecting to it via USB. It did not create the web >> server or anything so I am fairly sure it didn't update teh eMMC. >> >> Any suggestions would be appreciated. > What was the name of the file? > > Regards, > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
