On Mon, Aug 3, 2015 at 9:31 AM, Robert Nelson <[email protected]> wrote: > On Mon, Aug 3, 2015 at 9:15 AM, Christian Gurk > <[email protected]> wrote: >> Hi Robert, >> I tried your suggestion and it worked quite ok. Problem is, that the /var >> folder is mounted on the emmc?! That means, that this part my be affected by >> file system errors due to inproper shutdowns. Also I need to use graphical >> console (lxde or lxqt), samba, webserver & vncserver. Therefore I would need >> a lot of symlinks to get these programs running properly. I tried that >> already and had little success. > > Umm, it's a partition on the same "media".. I don't know why you split > it between microSD/eMMC... > > All your doing is setting '/' to ro except /var, so no symlink are required.. > > btw, you do actually have a linux machine.. Use the eMMC flasher on > one of your bbb's.. then after it'd done, stick in a blank microSD.. > > now you have a linux machine to run setup_sdcard.sh..
I should mention, this is the exact same setup i use on an beagleboard xm. It's been outside for 5-6 years now, same microSD card, running directly off solar power, so it get's it's power yanked on a daily basis. Only thing i've had to replace on it.. the power cord, as that rusted out... (outside of the sealed box) Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
