> > *Only thing i've had to replace on it.. the power cord, as that rusted* > * out... (outside of the sealed box)*
You should probably "replace" some of that dust on the screen with Windex too . . . last time i look at an image from it- it was pretty fuzzy. On Mon, Aug 3, 2015 at 7:33 AM, Robert Nelson <[email protected]> wrote: > On Mon, Aug 3, 2015 at 9:31 AM, Robert Nelson <[email protected]> > wrote: > > On Mon, Aug 3, 2015 at 9:15 AM, Christian Gurk > > <[email protected]> wrote: > >> Hi Robert, > >> I tried your suggestion and it worked quite ok. Problem is, that the > /var > >> folder is mounted on the emmc?! That means, that this part my be > affected by > >> file system errors due to inproper shutdowns. Also I need to use > graphical > >> console (lxde or lxqt), samba, webserver & vncserver. Therefore I would > need > >> a lot of symlinks to get these programs running properly. I tried that > >> already and had little success. > > > > Umm, it's a partition on the same "media".. I don't know why you split > > it between microSD/eMMC... > > > > All your doing is setting '/' to ro except /var, so no symlink are > required.. > > > > btw, you do actually have a linux machine.. Use the eMMC flasher on > > one of your bbb's.. then after it'd done, stick in a blank microSD.. > > > > now you have a linux machine to run setup_sdcard.sh.. > > I should mention, this is the exact same setup i use on an beagleboard > xm. It's been outside for 5-6 years now, same microSD card, running > directly off solar power, so it get's it's power yanked on a daily > basis. > > Only thing i've had to replace on it.. the power cord, as that rusted > out... (outside of the sealed box) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
