Anyway, yeah, not working. On Thu, Aug 6, 2015 at 5:07 PM, William Hermans <[email protected]> wrote:
> So . . . > william@xanbustester:~$ lsmod > >> Module Size Used by >> can_raw 5555 0 >> can_dev 11496 0 >> can 26598 1 can_raw >> usb_f_ecm 9066 1 >> g_ether 4633 0 >> usb_f_rndis 20474 2 g_ether >> u_ether 10985 3 usb_f_ecm,usb_f_rndis,g_ether >> libcomposite 43358 3 usb_f_ecm,usb_f_rndis,g_ether >> tda998x 11577 0 >> tilcdc 24624 0 >> omap_aes 12439 0 >> omap_sham 20563 0 >> omap_rng 4264 0 >> drm_kms_helper 103830 3 tda998x,tilcdc >> rng_core 7113 1 omap_rng >> uio_pdrv_genirq 3321 0 >> uio 8146 1 uio_pdrv_genirq >> leds_gpio 3186 0 >> > > william@xanbustester:~$ uname -r > 4.2.0-rc4-bone2 > > Searching the web . . . > > > > On Thu, Aug 6, 2015 at 4:56 PM, William Hermans <[email protected]> wrote: > >> Was reading through the older testers wanted posts . . . >> >> sudo apt-get install bb-customizations >> sudo apt-get install device-tree-compiler >> >> git clone https://github.com/RobertCNelson/bb.org-overlays >> cd ./bb.org-overlays/ >> >> sudo ./install.sh >> sudo shutdown now -r /* board hung, had to walk to it and yank power*/ >> >> cat /sys/devices/platform/bone_capemgr/slots >> 0: P----- -1 cape-CBB-Serial,r01,Logic Supply,cape-CBB-Serial >> 1: PF---- -1 >> 2: PF---- -1 >> 3: PF---- -1 >> >> sudo modprobe can >> sudo modprobe can-dev >> sudo modprobe can-raw >> >> sudo ip link set can0 type can bitrate 250000 triple-sampling on >> Cannot find device "can0" >> sudo ip link set can1 type can bitrate 250000 triple-sampling on >> Cannot find device "can1" >> >> Odd . . . maybe the CAN port is not currently plugged in. But shouldn't >> the port at least acknowledge it's there ? >> >> To be continued . . . >> >> >> >> >> On Thu, Aug 6, 2015 at 4:14 PM, Robert Nelson <[email protected]> >> wrote: >> >>> On Thu, Aug 6, 2015 at 6:12 PM, William Hermans <[email protected]> >>> wrote: >>> > Hey Robert if you have the time . . . If I need to install dtbo files ( >>> > specifically for the Logic Supply serial /CAN cape ) Which files / deb >>> am I >>> > looking for ? >>> >>> I haven't packaged them yet... >>> >>> https://github.com/beagleboard/bb.org-overlays >>> >>> > >>> > Long story short, I've update my older nfsroot rootfs via adding your >>> repo, >>> > apt-get install linux-image-4.2.xxx, editing uEnv.txt, and running >>> depmod. >>> > >>> > Also since I'm using a single uEnv.txt setup instead of a two stage . >>> . . I >>> > can emulate cmdline with no ill effects ? >>> >>> Correct! >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
