i can see that if your running full tilt MHZ with ethernet plugged in it runs a bit below 500ma normally
whats running and whats the cpu load ? On 8/7/2015 11:24 AM, [email protected] wrote: > Well, by no apparent reason at all, by the third day my BBB rose from > the dead and started booting again. No strange boot messages, like as > if nothing happened. However, 600mA current is being pulled by the BBB > from the power source with nothing connected to it, which I find > strange. Any ideas? > > On Wednesday, August 5, 2015 at 7:13:20 PM UTC-3, [email protected] > wrote: > > Hey guys, new user here. I got an issue with my BBB and I thought > maybe somebody here could help me. > > After fiddling around with my bbb debugging a custom made cape, it > stopped booting at all. When I plug in a serial debug cable to > read the boot messages i get the following: > > U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54) > DPLL locking failed for 0x44e00490 > ### ERROR ### Please RESET the board ### > > When I reset it, I get the message again. > > I tried to google the error message and had no success finding a > solution or any other issue similar to that. > > Does anybody have any idea on what might have caused that error? > Any idea on what could be done to fix it? Is there hope for my BBB? > > Thank You. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
