Nothing is plugged in, and no program is running at all for my tests. 2015-08-07 23:40 GMT-03:00 evilwulfie <[email protected]>:
> i can see that if your running full tilt MHZ with ethernet plugged in > it runs a bit below 500ma normally > > whats running and whats the cpu load ? > > > On 8/7/2015 11:24 AM, [email protected] wrote: > > Well, by no apparent reason at all, by the third day my BBB rose from the > dead and started booting again. No strange boot messages, like as if > nothing happened. However, 600mA current is being pulled by the BBB from > the power source with nothing connected to it, which I find strange. Any > ideas? > > On Wednesday, August 5, 2015 at 7:13:20 PM UTC-3, [email protected] > wrote: >> >> Hey guys, new user here. I got an issue with my BBB and I thought maybe >> somebody here could help me. >> >> After fiddling around with my bbb debugging a custom made cape, it >> stopped booting at all. When I plug in a serial debug cable to read the >> boot messages i get the following: >> >> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54) >> DPLL locking failed for 0x44e00490 >> ### ERROR ### Please RESET the board ### >> >> When I reset it, I get the message again. >> >> I tried to google the error message and had no success finding a solution >> or any other issue similar to that. >> >> Does anybody have any idea on what might have caused that error? Any idea >> on what could be done to fix it? Is there hope for my BBB? >> >> Thank You. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/CJtqehUj1zw/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
