On 18 August 2015 at 15:14, Robert Nelson <[email protected]> wrote: > On Tue, Aug 18, 2015 at 9:12 AM, Taceant Omnes <[email protected]> wrote: >> On 18 August 2015 at 14:42, Robert Nelson <[email protected]> wrote: >> >>> Really? 2015-07-28 boots fine here bbw A5 revision.. >>> >>> >>> U-Boot SPL 2015.07-00001-gdb56c3d (Jul 23 2015 - 09:03:27) >>> No AC power, disabling frequency switch >>> >>> >>> U-Boot 2015.07-00001-gdb56c3d (Jul 23 2015 - 09:03:27 -0500), Build: >>> jenkins-github_Bootloader-Builder-182 >>> >>> Watchdog enabled >> >> Hi Robert, >> >> I have a BBW Rev. A6a. The power LED is on, all the other LEDs are >> off. On a console connected to the USB port I see (about 22 seconds >> after reset) 'CCCCCCCC' then nothing for a minute or two, then a few >> more 'C's and so on. >> >> Do you (like me) have a single partition on your microSD card? >> >> This BBW works very well with an old Angstrom distro (with a different >> microSD card that has two partitions, a FAT and an ext partition). > > Yes, i flashed the exact same version you referenced for verification > purposes. > > sudo bmaptool copy --bmap > bone-debian-7.8-console-armhf-2015-07-28-2gb.bmap > bone-debian-7.8-console-armhf-2015-07-28-2gb.img.xz /dev/sdd > > > bmaptool: info: block map format version 2.0 > bmaptool: info: 432640 blocks of size 4096 (1.7 GiB), mapped 55595 > blocks (217.2 MiB or 12.9%) > bmaptool: info: copying image > 'bone-debian-7.8-console-armhf-2015-07-28-2gb.img.xz' to block device > '/dev/sdd' using bmap file > 'bone-debian-7.8-console-armhf-2015-07-28-2gb.bmap' > bmaptool: info: 100% copied > bmaptool: info: synchronizing '/dev/sdd' > bmaptool: info: copying time: 29.4s, copying speed 7.4 MiB/sec
Thanks, Robert. I will try bmaptool instead of dd to see if I have better luck. Bmaptool however does not exist in Fedora, nor in Lubuntu 12.10 so I will have first to upgrade to a newer Lubuntu version. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
