I'll read-up on copying my kernel config (greek at this point), but my main issue is the setup of the database, the web front end and all the related stuff with temp measuring and liquid levels that report to the webserver that's setup, that I'm worried about... I'm not "friendly" with this OS, so that has been a ton of work for me to piece together from others workings..
I looked at the uEnv on the waveshare image and did see tons of differences, know enough to know that copying them into mine isn't going to make things just work. I really need to get a "linux for dummies" book.. I'm very far behind the curve with this... Thanks for the help. Brad On Sunday, August 23, 2015 at 6:45:19 PM UTC-6, RobertCNelson wrote: > > On Sun, Aug 23, 2015 at 6:37 PM, Ridemywideglide <[email protected] > <javascript:>> wrote: > > I'm needing some help, as I have very limited experience with linux. > I've > > had a BBB for a few months now, and managed to cobble together many > > different items from google searches and sites like this one, and am > working > > towards a functional touch screen beer brewing controller. > > After getting to where I am now, I purchased a 7in touchscreen from ebay > > (china) that is a waveshare cape/lcd package. > > Waveshare has a debian image that I have downloaded, and it boots right > up > > to a working screen, but only runs from the card, no flasher. Trouble > is, I > > have lots of hours into the BBB setup I'm running now, and would of > course, > > rather not start over. I'm needing to get the LCD to work on my existing > > system. > > > > Running wheezy, kernal 3.8.13-bone74, > > So i'd start with copying your "working" kernel config and copy it to > the "working" debian setup.. > > http://www.waveshare.com/wiki/BB_Black_XXX_CAPE_Source_Code > > I don't see that anyone has submited support for that lcd for the > commuinty.. > > https://github.com/beagleboard/linux/tree/3.8/firmware/capes > > Looking at the schematic, it would be a pretty simplistic compared to > other capes for new users to port. ;) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
