> > *Thank you Andrew for your suggestion.But i don't want to use any extra > hardware.I want to use direct BBB.Wonder if i couldn't find Can Bus > driver for BBB ?*
Good luck with that. It is my understanding that you *have* to have a cape, or at minimum logic level translation in order to use the canbus on the BBB. Otherwise, the canbus behaves as if it's non functional. On Fri, Aug 28, 2015 at 11:52 PM, Onur Duran <[email protected]> wrote: > Thank you Andrew for your suggestion.But i don't want to use any extra > hardware.I want to use direct BBB.Wonder if i couldn't find Can Bus > driver for BBB ? > > 28 Ağustos 2015 Cuma 16:53:08 UTC+3 tarihinde Andrew P. Lentvorski yazdı: > >> Well, you need a CAN cape of some form to provide a CAN transceiver. >> Something like this: >> http://www.logicsupply.com/cbb-serial/ >> >> After that, follow the directions that the manufacturer provides. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
