Sounds like the Element14 product is different. Gerald
On Tue, Sep 8, 2015 at 12:57 PM, Fohnbit <[email protected]> wrote: > Thank you! > > I´m able to boot the *BBB from Circuitco* from uSD and flash the eMMC > with my image: > http://pastebin.com/NwxFPXRZ > > After finished, the BBB are not booting. Only Power LED is on, no User LED. > I just get as debug in Hex: > 1B 00 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 > I hear only at windows that something are doing on the USB (when > connecting USB device). > > When I boot from a *element14 BBB*, where I succesfully write the image, > I have this log: > http://pastebin.com/MUXcWYLD > > When I boot the *BBB from Circuitco* with a downloaded uSD Image, I have > this: > http://pastebin.com/XbMi1uaY > (here I found no quit argument on uEnv.txt) > > My question is now: > Why work my own image on the element14 RevC BBB but not on the Circuitco > BBB? > > Thank you! > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
