sudo rm /etc/modules-load.d/mt7601.conf Will fix it.. It's an external module we package for 3.8, 3.14. But backported from 4.2 for our 4.1 kernel. On Sep 19, 2015 12:50 AM, "Rick Mann" <[email protected]> wrote:
> Sorry, didn't remember that power-cycle was required. Where is that > documented? Also, why (curious why a regular reset isn't enough)? > > I asked systemd, and got the (rather generic, from my googling) answer: > > root@beaglebone:/home/debian# systemctl status > systemd-modules-load.service > ● systemd-modules-load.service - Load Kernel Modules > Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; > static) > Active: failed (Result: exit-code) since Sat 2000-01-01 00:00:08 UTC; > 15 years 8 months ago > Docs: man:systemd-modules-load.service(8) > man:modules-load.d(5) > Process: 162 ExecStart=/lib/systemd/systemd-modules-load (code=exited, > status=1/FAILURE) > Main PID: 162 (code=exited, status=1/FAILURE) > > Warning: Journal has been rotated since unit was started. Log output is > incomplete or unavailable. > > I looked through the modules-load.d directories, and found only one that > had anything in it: > > root@beaglebone:/home/debian# ls /etc/modules-load.d > modules.conf mt7601.conf > root@beaglebone:/home/debian# cat /etc/modules-load.d/modules.conf > # /etc/modules: kernel modules to load at boot time. > # > # This file contains the names of kernel modules that should be loaded > # at boot time, one per line. Lines beginning with "#" are ignored. > > root@beaglebone:/home/debian# cat /etc/modules-load.d/mt7601.conf > mt7601Usta > > I do have a little MediaTek dongle plugged in, although I'm not sure how > Linux magically installed a module conf file for it (this is the stock > console, but I did do apt-get install wireless-tools, did that see the > dongle and install it?). > > Anyway, I'm still not sure what's actually failing, or if it's important. > The board seems to be working, Ethernet certainly works, and iwlist scan > returns APs in the area, so I think the wifi dongle came up okay. > > Anyway, not too worried about it for now, just curious. > > Thanks, > Rick > > > On Sep 18, 2015, at 22:08 , Robert Nelson <[email protected]> > wrote: > > > > So ask systemd... > > > > systemctl status systemd-modules-load.service > > > > On Sep 18, 2015 11:35 PM, "Rick Mann" <[email protected]> wrote: > > And I may have spoken too soon. Actually power-cycling the board allowed > it to come up. But I still don't know what > > > > [FAILED] Failed to start Load Kernel Modules. > > > > means. > > > > Thanks! > > > > > On Sep 18, 2015, at 21:32 , Rick Mann <[email protected]> wrote: > > > > > > This is the transcript of the boot and flash and halt. If I remove the > SD card at this point and press the reset button, I just get CCCCCC... > > > > > > http://pastebin.com/GXufknPT > > > > > > I see "bad magic", but it seems to proceed on to running the flasher. > It formats the eMMC and reboots, then I see this: > > > > > > [ 132.166661] systemd[1]: systemd-modules-load.service: main process > exited, code=exited, status=1/FAILURE > > > [FAILED] Failed to start Load Kernel Modules. > > > > > > Then it continues for a couple more minutes, and eventually shuts > down. Not sure what's causing the problem (don't know enough about Linux to > interpret what I see). > > > > > > Help would be much appreciated, thank you. > > > > > > -- > > > Rick Mann > > > [email protected] > > > > > > > > > -- > > > For more options, visit http://beagleboard.org/discuss > > > --- > > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > Rick Mann > > [email protected] > > > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
