On Tue, Sep 22, 2015 at 12:44 PM, Jim Baxter <[email protected]> wrote:
> We are developing a product using the BBB. With battery backup to allow a > safe shutdown of the BBB and a safe restart of the application. The BBB > charges the Li ION cell OK but when the AC power to the BBB via the 5 volt > DC jack is switched off, the BBB draws approx 80mA from the Li ION cell and > does not go into low current sleep mode. Can anyone assist in fixing this > issue please as TI do not wish to support the BBB which is surprising > considering that most of the major chips are TI ones! > > Any assistance wold be most welcome :) > Have you posted this issue to e2e.ti.com and can you provide back a link to that so I can use it to follow-up internally at TI? Have you looked at what is drawing the power on the board? Have you triggered the software to go into low-current sleep mode? > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
