> > *actually PRU uio is only broken in ti's v4.1.x branch.. as the* > * remoteproc_pruss driver isn't upstream yet, you can renable uio_prus* > * in v4.1.x-bone/v4.2.x-bone/v4.3.**x-bone i've intentionally disabled > it* > * in those branches just so users don't get to use to it..*
I'd like a say in that matter myself. e.g. distinctive *bone*, and *ti* kernels. But I suppose that a kernel config option that can be changed later to something else ? Here is the problem I'm seeing with being forced to move to remoteproc. Documentation on the web completely sucks. Essentially, it's limited to a linux/Documentation/*.txt file. Which to me did not seem very informative. For me though, I tend to understand better if there is a working example. Setup, and all that. Then I can actually learn as I tinker with this example, and read the documentation bit by bit. In the end, I think remoteproc seems like very cool software technology. However, if there is limited to no documentation on the subject. Then it pretty much is useless . . . I've already seen several blog posts concerning the BBB, and remoteproc. They all seem to be in a holding pattern, because they can not seem to get things rolling. At least with using the PRU the "old way" we actually have something to work with . . . On Mon, Sep 28, 2015 at 2:48 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Mon, Sep 28, 2015 at 9:44 PM, Rick Mann <rm...@latencyzero.com> wrote: > > > >> On Sep 28, 2015, at 11:20 , Robert Nelson <robertcnel...@gmail.com> > wrote: > >> > >> On Mon, Sep 28, 2015 at 6:14 PM, Rick Mann <rm...@latencyzero.com> > wrote: > >>> Does anyone have an audio cape working in 4.1.x? Would you share your > specific kernel version, DTBO, and ASLA configurations? > >> > >> In v4.1.x-ti this version still doesn't work: > >> > >> > https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-BONE-AUDI-02-00A0.dts > >> > >> I had fixed all the regulator/sound/etc issues, so it does load, but > >> sound just doesn't come out.. > >> > >> I'm out for the rest of the week, so can't test it. > >> > >> Does installing v4.3.x-rc fix your audio cape? (for v4.1.x+ we are > >> using the same cape overlays..) > >> > >> sudo apt-get install linux-image-4.3.0-rc3-bone0 > > > > I'll try that when I get home. Since PRU UIO is broken past -ti-r10, I > hadn't considered trying those, but I will. I'm also trying 3.8.13-bone77, > but having a heck of a time getting all my stuff back-ported (just niggly > little DT things, capemgr in a different place, etc.). > > actually PRU uio is only broken in ti's v4.1.x branch.. as the > remoteproc_pruss driver isn't upstream yet, you can renable uio_prus > in v4.1.x-bone/v4.2.x-bone/v4.3.x-bone i've intentionally disabled it > in those branches just so users don't get to use to it.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
