Hi Gerald, I purchased this at a Maker Faire back in 2014 and don't even have the receipt.
I work at an electronics shop and want to fix it myself. I was just curious of the easiest way to debug what went wrong as well as possibly ordering a replacement TPS65217C if i need to. -Jimi On Tuesday, October 6, 2015 at 8:44:28 AM UTC-7, Gerald wrote: > > Most likely, the TPS65217C is fine. > > Do the RMA http://www.elinux.org/Beagleboard:BeagleBoneBlack#RMA_Support > > Gerald > > > > > > Gerald > > On Tue, Oct 6, 2015 at 10:45 AM, Bill Pretty <[email protected]> > wrote: > >> Just contact the folks for an RMA # >> >> >> >> *From:* [email protected] [mailto:[email protected]] >> *On Behalf Of *[email protected] >> *Sent:* Monday, October 05, 2015 10:44 PM >> *To:* BeagleBoard >> *Subject:* [beagleboard] I believed I shorted my board >> >> >> >> Hey , >> >> >> >> I was Loving my Beagle Bone black, but as I was pulling some usb cables, >> it moved my beagle bone black so that the backside of the PCB touched the >> ethernet metal enclosure of my Rasberry Pi ( it was jealous I had moved on >> ). After that happened I no longer see any LEDs at all on my Beagle Bone >> when I plug in the power ( 5v barrel ) or the USB mini. >> >> >> >> I bought another BBB and am going to test the equivalent resistances , >> diodes etc with the shorted board compared to the new working one that I >> just bought, but here's my question: >> >> >> >> >> >> If I blew out U2 ( the power management unit ) , are there any >> instructions for ordering and soldering the TPS65217C ? >> >> >> >> Cheers, >> >> >> >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Gerald > > [email protected] > http://beagleboard.org/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
