That is up to you, but my experience is that the problem is most likely is the processor. You can buy one from Digikey fro $23 not including shipping..
Goof luck! Gerald On Tue, Oct 6, 2015 at 8:01 PM, James Damon <[email protected]> wrote: > Hi Gerald, > > I purchased this at a Maker Faire back in 2014 and don't even have the > receipt. > > I work at an electronics shop and want to fix it myself. I was just > curious of the easiest way to debug what went wrong as well as possibly > ordering a replacement TPS65217C if i need to. > > -Jimi > > > On Tuesday, October 6, 2015 at 8:44:28 AM UTC-7, Gerald wrote: >> >> Most likely, the TPS65217C is fine. >> >> Do the RMA http://www.elinux.org/Beagleboard:BeagleBoneBlack#RMA_Support >> >> Gerald >> >> >> >> >> >> Gerald >> >> On Tue, Oct 6, 2015 at 10:45 AM, Bill Pretty <[email protected]> >> wrote: >> >>> Just contact the folks for an RMA # >>> >>> >>> >>> *From:* [email protected] [mailto: >>> [email protected]] *On Behalf Of *[email protected] >>> *Sent:* Monday, October 05, 2015 10:44 PM >>> *To:* BeagleBoard >>> *Subject:* [beagleboard] I believed I shorted my board >>> >>> >>> >>> Hey , >>> >>> >>> >>> I was Loving my Beagle Bone black, but as I was pulling some usb cables, >>> it moved my beagle bone black so that the backside of the PCB touched the >>> ethernet metal enclosure of my Rasberry Pi ( it was jealous I had moved on >>> ). After that happened I no longer see any LEDs at all on my Beagle Bone >>> when I plug in the power ( 5v barrel ) or the USB mini. >>> >>> >>> >>> I bought another BBB and am going to test the equivalent resistances , >>> diodes etc with the shorted board compared to the new working one that I >>> just bought, but here's my question: >>> >>> >>> >>> >>> >>> If I blew out U2 ( the power management unit ) , are there any >>> instructions for ordering and soldering the TPS65217C ? >>> >>> >>> >>> Cheers, >>> >>> >>> >>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
