Try the RMA again. Gerald
On Tue, Oct 27, 2015 at 6:51 AM, mahesh ingle <[email protected]> wrote: > Hi, > > I Also have exactly same behavior with my Rev C BBB. > > @Gerald: I tried RMA twice but i did not got any response !! I got the > Board from Sumeet Online shop which is listed on beagleboard.org for > Indian buyers. Any thoughts? > > > Thanks & Regards > Mahesh > > > On Wednesday, November 5, 2014 at 2:29:00 AM UTC+5:30, Shu Liu wrote: >> >> Hi, >> >> There should be a short on board. The U2 shuts itself down to prevent the >> high current draw which is caused by the short. That is why the LED goes >> off after it blinks once. >> >> Regards, >> Shu >> >> On Monday, October 27, 2014 10:56:34 PM UTC-5, [email protected] wrote: >>> >>> I am in the same situation. Was trying out new images. Did an forced >>> SD change to a non-bootable bbb. Now it won't boot. Just a pwr blink then >>> dead. >>> >>> Are there any other ways to recover other than RMA? PMIC replacement or >>> reflashing of bootloader? >>> >>> Sam >>> >>> On Wednesday, June 18, 2014 9:53:25 PM UTC+8, Gerald wrote: >>>> >>>> Request an RMA. >>>> >>>> http://beagleboard.org/Support/RMA >>>> >>>> And read this. >>>> http://www.elinux.org/Beagleboard:BeagleBoneBlack#Hardware >>>> >>>> Gerald >>>> >>>> >>>> On Mon, Jun 9, 2014 at 5:54 PM, <[email protected]> wrote: >>>> >>>>> My BBB (A5A) was working fine with ARM Arch (installed on the eMMC), >>>>> but since yesterday it won't turn on. I don't know what changed. >>>>> >>>>> When I plug the power source or the USB cable the PWR Led quickly >>>>> blinks, but the board doesn't turn on. >>>>> If I press the POWER button, the PWR led does a single blink too, but >>>>> it doesn't proceed to boot. >>>>> >>>>> I also tried to boot from the SD card, but It didn't work. >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
