Hi, I have a beagleboard rev 4, that I have newer used since it was new. Now I have tried to start it up for the first time. I have not added any memory card and no Linux image yet. Instead I have plugged in power via USB, and the serial cable between PC and the beagleboard.
I have tried to plug both an USB Mini-B and an USB Mini-A Male into the OTG socket on the Beagleboard. But the serial port hangs so nothing from beagleboard bootup sequence is printed. when I run the command: picocom -b 115200 /dev/ttyUSB0 I know that the serial communication is working because I have another Olimix card that I am able to communicate with. Is the board broken or have I missed any step to get it up and running -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
