There are four different BeagleBoards, can you give us some more information on the board? There also was not a rev 4 made. We use letters A,B,C followed by numbers on our revisions.
http://www.elinux.org/Beagleboard:Main_Page Gerald On Thu, Nov 5, 2015 at 6:52 AM, <[email protected]> wrote: > Hi, > I have a beagleboard rev 4, that I have newer used since it was new. > > Now I have tried to start it up for the first time. I have not added any > memory card and no > Linux image yet. Instead I have plugged in power via USB, and the serial > cable between PC and the > beagleboard. > > I have tried to plug both an USB Mini-B and an USB Mini-A Male into the > OTG socket on the > Beagleboard. > > But the serial port hangs so nothing from beagleboard bootup sequence is > printed. > > when I run the command: > > picocom -b 115200 /dev/ttyUSB0 > > I know that the serial communication is working because I have another > Olimix card that I am > able to communicate with. > > Is the board broken or have I missed any step to get it up and running > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
