>From my viewpoint, sounds like something in you application. Gerald
On Mon, Nov 23, 2015 at 12:32 PM, evilwulfie <[email protected]> wrote: > Oh one more question > > Does the board lockup while not running your application. > > > On 11/23/2015 10:59 AM, Lee Armstrong wrote: > > Gerald, > > We are not seeing any booting issues though, the boards all boot fine and > have never had an issue there. The boards are powered on and then simply > look like they power off and trying to troubleshoot the issue, is there any > info we can get by attaching to the PMIC at all? > > I have a serial debug cable attached to the BBB and that simply logs > nothing in the console and then becomes unresponsive. The OS is off, > confirmed as it loses network and all TTY access. Pretty sure it is not > software induced as nothing in logs etc when it does come back. > > The only thing that gets it back and working is to remove and re-apply > power. > > What would cause this to happen is what we are trying to get to the bottom > of. > > Lee > > > On Mon, Nov 23, 2015 at 5:55 PM, Gerald Coley <[email protected]> > wrote: > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
