You might hook up a JTAG emulator and break in and see where it is stuck. Gerald
On Mon, Nov 23, 2015 at 1:27 PM, Lee Armstrong <[email protected]> wrote: > OK that is a start and I will look into those other points. > > Is there any way to debug a hang like this where it simply locks up? > > > > > On Mon, Nov 23, 2015 at 7:26 PM, Gerald Coley <[email protected]> > wrote: > >> From my viewpoint, sounds like something in you application. >> >> Gerald >> >> >> On Mon, Nov 23, 2015 at 12:32 PM, evilwulfie <[email protected]> >> wrote: >> >>> Oh one more question >>> >>> Does the board lockup while not running your application. >>> >>> >>> On 11/23/2015 10:59 AM, Lee Armstrong wrote: >>> >>> Gerald, >>> >>> We are not seeing any booting issues though, the boards all boot fine >>> and have never had an issue there. The boards are powered on and then >>> simply look like they power off and trying to troubleshoot the issue, is >>> there any info we can get by attaching to the PMIC at all? >>> >>> I have a serial debug cable attached to the BBB and that simply logs >>> nothing in the console and then becomes unresponsive. The OS is off, >>> confirmed as it loses network and all TTY access. Pretty sure it is not >>> software induced as nothing in logs etc when it does come back. >>> >>> The only thing that gets it back and working is to remove and re-apply >>> power. >>> >>> What would cause this to happen is what we are trying to get to the >>> bottom of. >>> >>> Lee >>> >>> >>> On Mon, Nov 23, 2015 at 5:55 PM, Gerald Coley <[email protected]> >>> wrote: >>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/SXP2YuC0dTA/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
