Thanks Keith, Tried that, and also built BBBAndroid from your manifest over the weekend but still have the same issues.
What brand/model wifi adapter are you using? Starting to think it might be a h/w issue... Nicklas On Thursday, 19 November 2015 16:25:11 UTC-5, Keith Conger wrote: > > Hi Nicklas, > > Try adding "ap_scan=1" to the bottom of your wpa_supllicant.conf. Also > until Andrew has time to merge my changes. You can get them from > http://development.thecongers.org/home/bbbandroid-bluez I also have a > build posted. > > Keith > > On Monday, November 16, 2015 at 10:04:53 AM UTC-7, Nicklas Holm wrote: >> >> Hi all, >> >> I am using a BBB running BBBAndroid in a prototyping project. I have >> built BBBAndroid and made the changes suggested by Keith Conger in an >> earlier post ( >> https://groups.google.com/forum/#!searchin/beagleboard/wifi/beagleboard/tHXTzJhH_Qc/1dIcYqFlj5gJ >> ). >> >> On the surface everything seems to be working as I can enable/disable >> wifi and see all networks. However, when I try to connect to a network. the >> status goes from 'Connecting' to 'Obtaining IP address' and gets stuck >> there for a while. It then goes back and forth between the two statuses >> indefinitely. >> >> I am using a Plugable USB adapter based on the RTL8188CU(S) chipset ( >> http://plugable.com/products/usb-wifint) >> >> Has anyone else experienced something similar? >> >> Thanks! >> Nicklas >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
