I should also mention you may need to adjust the kernel modules loaded in your init.<device>.rc file for your device.
Keith On Mon, Nov 30, 2015 at 3:26 PM, Keith Conger <[email protected]> wrote: > Sorry for the delay. The two devices I tested were both rtl8192cu > devices. I'm currently using this BT/Wifi combo device: > https://www.amazon.com/gp/product/B005QUQPDA/ref=od_aui_detailpages00?ie=UTF8&psc=1 > > Keith > > On Mon, Nov 23, 2015 at 1:43 PM, Nicklas Holm <[email protected]> > wrote: > >> Thanks Keith, >> >> Tried that, and also built BBBAndroid from your manifest over the weekend >> but still have the same issues. >> >> What brand/model wifi adapter are you using? Starting to think it might >> be a h/w issue... >> >> Nicklas >> >> >> On Thursday, 19 November 2015 16:25:11 UTC-5, Keith Conger wrote: >>> >>> Hi Nicklas, >>> >>> Try adding "ap_scan=1" to the bottom of your wpa_supllicant.conf. Also >>> until Andrew has time to merge my changes. You can get them from >>> http://development.thecongers.org/home/bbbandroid-bluez I also have a >>> build posted. >>> >>> Keith >>> >>> On Monday, November 16, 2015 at 10:04:53 AM UTC-7, Nicklas Holm wrote: >>>> >>>> Hi all, >>>> >>>> I am using a BBB running BBBAndroid in a prototyping project. I have >>>> built BBBAndroid and made the changes suggested by Keith Conger in an >>>> earlier post ( >>>> https://groups.google.com/forum/#!searchin/beagleboard/wifi/beagleboard/tHXTzJhH_Qc/1dIcYqFlj5gJ >>>> ). >>>> >>>> On the surface everything seems to be working as I can enable/disable >>>> wifi and see all networks. However, when I try to connect to a network. the >>>> status goes from 'Connecting' to 'Obtaining IP address' and gets stuck >>>> there for a while. It then goes back and forth between the two statuses >>>> indefinitely. >>>> >>>> I am using a Plugable USB adapter based on the RTL8188CU(S) chipset ( >>>> http://plugable.com/products/usb-wifint) >>>> >>>> Has anyone else experienced something similar? >>>> >>>> Thanks! >>>> Nicklas >>>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/27KsKa6qDaw/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Keith Conger > keith DOT conger AT gmail DOT com > http://thecongers.org > -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
