Hi John, thanks for the infos. The problem is that I need to use the PRUSS, right now my bbb runs a 3.8.13 kernel with pru support and I've read here <https://groups.google.com/forum/#!category-topic/beagleboard/pru/SqB8dWEUbtE> that the newest versions could be a bit problematic on this front. But I won't need the TI PRU cape support so maybe just building the kernel would be fine, I still need to do a bit of googling about this.
Thanks again! Il giorno giovedì 26 novembre 2015 22:40:17 UTC+1, john3909 ha scritto: > > BTW, CPTS and PTP_1588_CLOCK are enabled in the ti-linux-kernel-dev repo, > so if you use 4.1.13-ti-r34, you have everything you need. Now if you look > in drivers’ptp you will find code for PTP. Not sure if any of this will > work on the BBB, but it is a good place to start. > > Regards, > John > > > > > > On Nov 26, 2015, at 11:55 AM, hllpc <[email protected] <javascript:>> > wrote: > > > > Hi John, > > strangely enough I haven't found anything specific for the bbb, I was > thinking about using linuxptp (which allow both sw and hw timestamping). > > The only reference I've found is hete in the forum ( > https://groups.google.com/forum/m/#!topic/beagleboard/QHXb2hm72A8 ) and > it seems like i have to enable the CPTS driver on the bbb, but i've no idea > how to do it! I was hoping in any kind advice from the community! > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] <javascript:>. > > For more options, visit https://groups.google.com/d/optout. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
