I restarted from a backup, updated /opt/scripts/ with kernel 3.8 and
installed the new kernel using dpkg as William suggested. No luck.
usb0 Link encap:Ethernet HWaddr 84:eb:18:ae:cb:a0
inet addr:192.168.7.2 Bcast:192.168.7.255 Mask:255.255.255.0
inet6 addr: fe80::86eb:18ff:feae:cba0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:76 (76.0 B) TX bytes:9563 (9.3 KiB)
root@beaglebone:~# systemd-journalctl | grep usb
Mar 01 21:02:39 beaglebone udhcpd[772]: is interface usb0 up and
configured?...e
Mar 01 21:02:45 beaglebone avahi-daemon[692]: New relevant interface
usb0.IP....
Mar 01 21:02:46 beaglebone ntpd[1133]: Listen normally on 4 usb0
192.168.7....23
Mar 01 21:02:46 beaglebone avahi-daemon[692]: New relevant interface
usb0.IP....
Mar 01 21:02:48 beaglebone ntpd[1133]: Listen normally on 5 usb0
fe80::86eb...23
restarting udhcpd also does not do the trick. Any ideas?
Thanks for your help!
On Monday, December 7, 2015 at 5:55:23 PM UTC+1, Fabian Dalbert wrote:
>
> it should be now. however I don't currently have network access on the
> beaglebone, I therefore cloned
> https://github.com/RobertCNelson/boot-scripts to my desktop and copied it
> over.
>
> On Monday, December 7, 2015 at 5:26:11 PM UTC+1, RobertCNelson wrote:
>
> ahh, looks like a race between usb0 & udhcpd..
>>
>> is /opt/scripts/ up to date?
>>
>> cd /opt/scripts/
>> git pull
>>
>> Regards,
>>
>> --
>> Robert Nelson
>> https://rcn-ee.com/
>>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
