Some new info: It doesn't seem like the cape_universal=enable makes any difference whatsoever, meaning by taking it out nothing changes.
Regarding fixing the USB problem, I'm not sure if it did fix it after all. I'm running the beaglebone with a separate 5V power supply plugged in, so it isn't being powered by USB. When I first boot the USB exhibits the same problem, the beaglebone side doesn't receive any ethernet packets. But if I unplug the usb and plug it back in, the USB works fine, without making any bone_capemgr changes at all. This isn't an option when the beaglebone is being powered by USB, unplugging it will shut it down and when it is plugged in again everything starts over... -Dave On Sunday, February 14, 2016 at 1:17:37 PM UTC-6, [email protected] wrote: > > > The USB problem I was experiencing went away with this cape-universal > overlay, so I assume it's another pinmux flaw, > and it wasn't an interrupt problem like I thought. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
