On Mon, Dec 7, 2015 at 1:39 PM, Robert Nelson <[email protected]> wrote:
> > > On Mon, Dec 7, 2015 at 1:33 PM, John Syne <[email protected]> wrote: > >> Hi Robert, >> >> I bought this cable and connected a 240GB SSD. I dd a 32GB SDCard image >> to the SSD. I can mount /dev/sda1 and see rootfs. I changed the jumpers to >> select SATA as shown the the quick start guide (J3 1-2, j4 2-3, j6 2-3) and >> removed the SDCard. After powering down, I push the power button (s1), I >> see the power led (D3) light for a few seconds and goes out. I see nothing >> on the console. I also tried setting the jumpers per the PCB legend (J3 >> 2-3, J4 1.2 J6 2-3) and I get the same results. >> > > Oh, don't change the jumpers. The production x15's isn't going to have > them, only the am57xx evm's. > (and i haven't spent any time figuring out how to raw boot from a scsi device, probably need a custom u-boot setting... ;) ) Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
