In u-boot, “scsi scan” doesn’t show anything. even “scsi reset” doesn’t find any devices.
Regards, John > On Dec 7, 2015, at 11:45 AM, Robert Nelson <[email protected]> wrote: > > > > On Mon, Dec 7, 2015 at 1:39 PM, Robert Nelson <[email protected] > <mailto:[email protected]>> wrote: > > > On Mon, Dec 7, 2015 at 1:33 PM, John Syne <[email protected] > <mailto:[email protected]>> wrote: > Hi Robert, > > I bought this cable and connected a 240GB SSD. I dd a 32GB SDCard image to > the SSD. I can mount /dev/sda1 and see rootfs. I changed the jumpers to > select SATA as shown the the quick start guide (J3 1-2, j4 2-3, j6 2-3) and > removed the SDCard. After powering down, I push the power button (s1), I see > the power led (D3) light for a few seconds and goes out. I see nothing on the > console. I also tried setting the jumpers per the PCB legend (J3 2-3, J4 1.2 > J6 2-3) and I get the same results. > > Oh, don't change the jumpers. The production x15's isn't going to have them, > only the am57xx evm's. > > (and i haven't spent any time figuring out how to raw boot from a scsi > device, probably need a custom u-boot setting... ;) ) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ <https://rcn-ee.com/> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
